RM3090E _59 Vehicle Exterior _008798 EXTERIOR PANELS / TRIM _0050282 WHEEL OPENING MOULDING A

EXTERIOR PANELS / TRIM WHEEL OPENING MOULDING REMOVAL

CAUTION / NOTICE / HINT

HINT:: ·

Use the same procedure for the RH and LH sides.

·

The procedure listed below is for the LH side.

PROCEDURE

Hide Display 52119A 1.REMOVE FRONT BUMPER COVER

Click hereVehicle Exterior>EXTERIOR PANELS / TRIM>FRONT BUMPER>REMOVAL201212,201410,_59,_008798,_0050008,RM1000000004DUZ,201410,999999,_59,_008798,_0050008,RM100000000H4HN,

Hide Display 52159 2.REMOVE REAR BUMPER COVER

Click hereVehicle Exterior>EXTERIOR PANELS / TRIM>REAR BUMPER>REMOVAL201212,201410,_59,_008798,_0050105,RM1000000004E5Y,201410,999999,_59,_008798,_0050105,RM100000000KCG2,

Hide Display 76622D 3.REMOVE FRONT FENDER MUDGUARD LH (w/ Mudguard)

Remove the clip.

Remove the 3 screws and front fender mudguard LH.

Hide Display 75602A 4.REMOVE FRONT FENDER MOULDING SUB-ASSEMBLY LH

HINT:: When removing the front fender moulding, heat the vehicle body and front front fender moulding using a heat light.

Standard:

Item	Temperature
Vehicle Body	40 to 60°C (104 to 140°F)
Front Fender Moulding	20 to 30°C (68 to 86°F)

NOTICE:: Do not heat the vhecle body or front fender moulding excessively.

1.292,0.604 1.656,0.604 1.656,0.604 1.656,0.26 true 2.563,0.5 2.917,0.5 true 0.75,1.219 1.76,1.219 1.76,1.219 1.76,0.896 true 1.104,1.208 1.104,0.938 true 1.698,1.542 1.979,1.542 1.979,1.542 2.323,2.021 true 2.938,0.406 3.25,0.563 0.313,0.156 10 *1 1.146,0.531 1.458,0.688 0.313,0.156 10 *2 0.594,1.135 0.906,1.292 0.313,0.156 10 *3 1.552,1.458 1.865,1.615 0.313,0.156 10 *4

*1	Protective Tape
*2	Double-sided Tape
*3	Clip A
*4	Clip B

Remove the 2 clips labeled A and clip labeled B.

Put protective tape around the front fender moulding sub-assemlby LH.

Using a moulding remover, detach the 8 clips.

Detach the double -sided tape to remove the front fender moulding sub-assembly LH.

Hide Display 65632B 5.REMOVE REAR WHELL HOUSE FRONT PLATE LH

Remove the screw.

Detach the clip and rear wheeel house front plate LH.

Hide Display 75606A 6.REMOVE QUARTER OUTSIDE MOULDING SUB-ASSEMBLY LH

HINT:: When removing the quarter outside moulding, heat the vehicle body and quarter outside moulding using a heat light.

Standard:

Item	Temperature
Vehicle Body	40 to 60°C (104 to 140°F)
Quarter Outside Moulding	20 to 30°C (68 to 86°F)

NOTICE:: Do not heat the vhecle body or quarter outside moulding excessively.

0.271,0.5 0.719,0.5 true 1.844,0.646 2.198,0.646 2.198,0.646 2.198,0.281 true 0.146,0.417 0.458,0.573 0.313,0.156 10 *1 1.698,0.552 2.01,0.708 0.313,0.156 10 *2

*1	Protective Tape
*2	Double-sided Tape

Remove the 2 clips.

Using a moulding remover, detach the 9 clips.

Detach the double-sided tape to remove the quarter outside moulding sub-assembly LH.

FaceBox